Authorized HALLCO® LIVE FLOOR® dealer in Vietnam
Genuine American moving floors: the box stays level while the floor moves bulk cargo out of the rear door. Nhu Tin surveys, installs and registers the factory warranty for new trucks and trucks already on the road.
- 1968 Year HALLCO filed its first moving floor patent
- 4 Continents where the HALLCO group has locations
- 2 HALLCO manufacturing plants
- 2 years Factory warranty on the complete i-Series system
What is a LIVE FLOOR® moving floor?
It is a floor of aluminium slats laid side by side along the bottom of the truck box. A hydraulic drive splits the slats into three groups and moves them back and forth in a cycle. The weight of the load and its own friction carry the whole load towards the rear door, while the box stays level.
HALLCO® invented this type of floor: its first patent was filed in 1968 in Tillamook, Oregon. More than 50 years later, the company still designs, tests and builds its systems in its own plants.
See how the floor works
Time spent waiting in the yard is money. A moving floor wins it back.
Every hour a truck waits for a loader or for workers with rakes is a trip it does not run. These are the costs a moving floor cuts from the very first load.
-
More trips every day
The truck arrives and unloads, with no queue for a loader or a raking crew. The time saved in the yard becomes extra trips. For light cargo, Accelerator™ mode unloads up to 30% faster.
-
Lower handling cost per trip
One driver unloads the whole load alone. No extra hands to rake the cargo, no dependence on a loader at the delivery point.
-
No need to buy a new truck
Nhu Tin retrofits the trailers and trucks you already run. You invest in the floor only, not in a whole vehicle.
-
Deliver to more sites
The box stays level while unloading, so the truck can work in low-roof warehouses, near power lines and on uneven ground, places where tippers struggle.
-
Fewer workplace accidents
The driver operates from the ground, so nobody climbs into a box full of wood chips or waste. The box never rises, so it cannot tip over.
-
No product left behind, no cleaning
The floor pushes cargo right to the rear edge and the clean-out tarp sweeps up the rest. The box is ready for the next load, even a different cargo.
The HALLCO® product range
A complete floor is made of a drive, bearings, a subdeck and floor slats. Nhu Tin selects each part for your cargo, payload and truck.
-
i-Series / i-6000
A hydraulic drive with its seals enclosed inside the cylinders, mounted under the floor. The main line for bulk trailers, rated 35 to 45 tons (US).
i-Series details -
W Floor
A floor sealed along the full length and width of the box that keeps leachate from wet waste inside the truck. Paired with the front-mounted BRUTE drive.
W Floor details -
Floor slats and plastic floor
More than ten aluminium slat profiles for different cargo, plus a plastic slat built to a HALLCO® patented design.
See the slat profiles -
Stationary systems
LIVE FLOOR® installed permanently in bins, bunkers and containers at the plant, feeding material evenly to a production line or boiler.
Stationary systems
Which bulk cargo can ride on a LIVE FLOOR®?
From light and fluffy to heavy and wet. These are the materials customers in Vietnam ask about most.
Factory warranty when you buy through Nhu Tin
| Term | Coverage and conditions |
|---|---|
| 2 years | The complete i-Series system. Counted from the date of delivery to the first owner. |
Under HALLCO rules, the selling dealer is responsible for registering the warranty for the end user within 10 days of delivery. When Nhu Tin installs your floor, this is done at handover.
Read the warranty terms
How an installation with Nhu Tin works
Four steps, from the first phone call to the first trip on the new floor.
-
01
Site survey
We inspect the chassis, the box dimensions and the tractor's hydraulic supply, and ask about your cargo and load per trip.
-
02
Proposal and quote
We select the right drive and slat profile, then send a quote together with an installation schedule.
-
03
Installation
Fitted to HALLCO® procedures, including the factory-approved high-pressure filter, before the truck goes back on the road.
-
04
Handover and warranty
We train your driver on operation and maintenance and file the warranty registration with the factory within 10 days.
Nhu Tin has hauled bulk cargo since 2010
Nhu Tin Corporation has worked in bulk haulage since 2010 and supplies biomass fuel made from cashew nut shell residue to industrial boilers.
We know exactly how long a truck sits in the yard waiting to be dug out or raked, because that used to be our own daily routine. That is why Nhu Tin chose to represent HALLCO®, the company that invented this floor.
About Nhu TinFrequently asked questions
Can't find your question? See all questions or call 0907 917 301.
How much does a HALLCO® moving floor cost?
The price depends on the box length, the slat type, the drive model and whether it is a new build or a retrofit. Send Nhu Tin your truck type, box dimensions and usual cargo, and we will quote for exactly that configuration.
Can you fit a truck that is already in service?
Yes. HALLCO® floors fit almost any trailer, truck or container, new or used. Nhu Tin surveys the chassis and box first to see what reinforcement or changes are needed.
What does the tractor need to run the floor?
A hydraulic supply: a pump driven by a power take-off (PTO) or the engine, an oil tank, a filter and lines. For the i-Series, HALLCO requires a minimum rated pressure of 207 bar and a flow of no more than 114 litres per minute. Nhu Tin checks the tractor's existing system during the survey.
What is the warranty?
The i-Series system carries a 2-year warranty for the first owner from the date of delivery. The selling dealer must register it with the factory within 10 days, and Nhu Tin does this at handover.
What cargo can the floor carry?
According to HALLCO, the floor moves any bulk material with enough weight on the floor and enough friction: wood chips, sawdust, rice husk, cashew nut shells, produce, animal feed, waste, scrap and coal. Each cargo group suits its own slat profile.
Get a quote for your truck
Message Nhu Tin on Zalo or call us with your truck type and cargo. A technician will ask for the details and quote for your exact configuration.
Fastest way: message us on Zalo with your truck type and a few photos of the truck body. A Nhu Tin technician replies during business hours.
Message on Zalo Call +84 907 917 301Outside business hours, message us on Zalo anyway and Nhu Tin will reply as soon as possible.